They form the interface to other parts of the LAN or to the Internet. Here auto MDIX is permanently switched on, so it does not matter if the auto negotiation parameter is disabled.ĭisplay only: the addresses via which the mGuard can be accessed by devices from the external network. Connect the mGuard s to the DTE interface using an Ethernet crossover cable. The mGuard platforms have DTE interfaces. For a more detailed explanation of the options for using the serial interface (and a built-in modem), see “Modem / Console” on page 156. The details for this must be configured on the General, Dial-out, Dial-in, and Modem / Console tab pages. For devices with a built-in modem (analog modem or ISDN terminal adapter), the modem can also be used to combine access options. Alternatively, the serial interface can also be used as follows: for PPP dial-in into the local network or for configuration purposes. For devices with a serial interface, the connection to the external network can also or additionally be established via the serial interface using a modem. The WAN port is used to connect to the external network. The LAN port is connected to a stand-alone computer or the local network (internal). TC MGUARD RS2000 3G, TC MGUARD RS2000 4GįL MGUARD GT/GT, FL MGUARD RS, FL MGUARD PCI 533/266, FL MGUARD BLADE, FL MGUARD DELTA, mGuard Centerport (Innominate), mGuard delta (Innominate)ġSee “Serial console via USB” on page 157. The mGuard has the following interfaces with external access:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |